|
|
如果您对该产品感兴趣的话,可以
产品名称:
Thermal shock chamber
产品型号:
AIR TO AIR
产品展商:
上海简户仪器设备有限公司
简单介绍
Thermal shock Thermaloffer totally new performance and style. Shortened temperature recovery times and temperature rise and fall times, reduced power requirements。Thermal shock chamber Supllies
|
Thermal shock chamber
的详细介绍
|
|
- Thermal shock chamber
- chamberShock Chamber the use of HFC refrigerants, and the adoption of touch panel instruments for operation settings make the TSA series even easier to use and more environmentally friendly.
- A revised structure and the development of a new refrigeration control system have realized a 37% reduction in power consumption.
- A temperature recovery time of less than 5 minutes is realized for the 2-zone (+150°C and -65°C) and 3-zone circulated air (less than 10 minutes for the TST-601 and TST-606).
- The air blower mechanism uses a side flow system for superior sample temperature distribution.
- Material designations are used on plastic components to facilitate easy material recycling.
- Operation noise generated by the unit has been reduced to less than 65 dB to improve the work environment.
| Models | T ES-A | TES-B | TES-C | TES-D | TES-G | | Inside Dimensions W x D x H cm | 40 x 35 x 30 | 50 x 40 x 40 | 60 x 50 x 50 | 70 x 60 x 60 | 80 x 70 x 60 | | Outside Dimensions W x D x H cm | 140 x 150 x 195 | 150 x160 x 215 | 160 x 186 x 205 | 170 x200 x 213 | 180 x 215 x 215 | | Precool / Preheat Range | -80.00'C ~ 00.00'C / +60.00'c ~ +200.00'C | | Shocking Range | -65.00'C ~ 00.00'C / +60.00'C ~ + 150.00'C | | Time Range | 0 hour 1 min ~ 9999 hour 59 min / segment | | Resolution | 0.01'C / min | | Control Constancy | 0.20'C | | Micro Controller | 日本OYO |
| | ※以上規格僅供參考，如有變更不另行通知。 |
Model | Power supply | Temperature range | Test area dimensions
W x H x D mm (cm) | TST-301/501/601 | 200VAC
AC 3 3 380VAC 400/415VAC 3 | WST-30# High temp chamber: +80 to +200°C
Low temp chamber: -35 to -10°C 3 | WST-50# High temp chamber: +60 to +200°C
Low temp chamber: -55 to -10° |
| 350x 350 x 4000 mm
(160 x 190 x 140) cm | TST-302/502/601 | TST-303/503/603 | 500 x 400 x 400 mm
(180 x 200 x 140) cm | TST-304/504/604 | 600 x 400 x 450 mm
(190 x210 x 140)cm | TST-305/505/605 | High temp chamber: +80 to +200°C (+140 to +392°F)
Low temp chamber: -65 to -10°C (wst-60#) | 600 x 400 x 450mm
(190x 210 x 140)cm | TST-306/506/606 | 600 x 600 x 600mm
(190x 230 x 155)cm | | | 800 x 800 x800mm (260 x 200 x 180).cm | | 100 x 100 x 100 ,mm
(280 x 220 x 200)cm |
冷熱衝擊試驗機，用來測試材料結構或複合材料，在瞬間下經極高溫及極低溫的連續環境下所能忍
受的程度, 藉以在最短時間內 試驗其因熱脹冷縮所引起的化學變化或物理傷害.適用的對象包括金屬,
塑膠, 橡膠, 電子....等材料,可作為其產品改進的依據或參考
動態即時變化程式編輯曲線
 |  繁簡體中文、英文三種畫面語系切換 | Error 故障病歷表軟體裝置
| | | 動態即時變化程式編輯曲線 | | | 待測品靜止自動引導預冷區、室溫、預冷區溫度衝擊 | | | Help 操作說明List 簡易表單操作 | | | 二箱、三箱式衝擊試驗程式控制,可符合MIL, ICE, JIS規範 | | | 環保冷媒,板式冷熱交換器與二元式超低溫冷凍系統 | | | 可在預約開機時間運轉中自動提前預冷,預熱待機功能 | | | 完善的安全保護協調系統自動文字指引異常發 生原因 | | | 出風口與回風口感知器檢知控制 |
| | | 可擴充液態氮LN2快速低溫衝擊控制與時序接點裝置 |
|
|